Festo HMPL-M Serie Instrucciones De Utilizacion página 19

HMPL-...-M..-...
Fitting pneumatic components
S Connect the tubing to the compressed air connections 7 and
mediate position cylinder type HMPL-...-M..-...
Depending on the work load mass, it may be necessary to restrict the exhaust
when movement is made towards the intermediate position from the extended
end position of the HMPL-... (see chapter "Characteristic curves").
S
Use 5/2-way valves for actuating the:
– intermediate position cylinder
– linear module
(e.g. activation with Compact Perform-
ance valve terminal type CPV..-... as in
Fig. 10).
Fitting electric components
Interrogating the intermediate position
S
Use proximity switches of type
SME-8-.../SMT-8-...-B.
These can be placed as follows:
– in the groove of the intermediate
position cylinder
– in the groove of the positioning
element.
Festo HMPL-...-M..-... 0009NH English
aJ
on the inter-
aJ
Fig. 10
Fig. 11
7
19