KTM 78113900100 Guia De Inicio Rapido página 7

12
13
13
14 15
1
17
- Unscrew the banjo bolt (11) and remove the original brake line from the
rear brake caliper.
11
- Disconnect the plug-in connection (12) of the brake light switch
- Remove the screws (13) and take off the rear brake cylinder (14) with the
brake line.
- Remove the screw (15) and disassemble the foot brake lever (16).
16
Assembly
- Fix the brake line with the original banjo bolt (11) and two seal rings (2)
to the rear brake caliper (15 Nm).
2
2
11
- Assemble the brake line into the guide (17).
NOTE:
Ensure that the brake line does not collide with the shock absorber.
7