Analysis And Problems Solving; Problem, Causes And Solutions; Adjustments And Components Replacement - Skymsen DC-06 Manual De Instrucciones

5. Analysis and Problems Solving

5.1 Problem, causes and solutions

The Peelers were designed to operate with the need of minimum maintenance but
the natural wearing caused by long use of the equipment may occasionally cause some
malfunctions.
If such problem occurs with your peeler refer to Table 02 in which the most common
situations are listed with recommended solutions.

5.2 Adjustments and components replacement

The Disc # 11 (Pic.01) is coated with ALUMINIUM OXIDE, responsible to wear the potatoes
peel. After some time the Aluminium Oxide will be worn out and therefore the machine
efficiency will drop.
Whenever it happens take the disc to Technical Assistance to renew the coat.
15