Foppapedretti CAR&GO Manual Del Usuario página 34

I
I
Return the shell to its original position (I) (taking care not to trap the diagonal
shoulder belt) and thread the installation bar back through the seat (J).
Secure the catch on the top right hand side of the child car seat (K).
Pull the installation bar to ensure it is securely locked in place.
NOTE: If you are having difficulty replacing the installation bar - first ensure
you have not trapped the diagonal seatbelt in the way, then jiggle the
installation bar to help work it through the shell.
seatbelt to come undone in an accident. If you find you are experiencing 'buckle
crunch' then this child car seat is not suitable for your vehicle.
WARNING: The child car seat should always be strapped in using the vehicle's
seatbelt, whether a child is seated in the child car seat or not.
34
installing for group
K
K
1 (9-18 )
kg
J
With your child car seat now
buckled in, check it is secure
by pulling forward from both
harness straps, there should
be little or no movement.
Next check that the vehicle's
seatbelt buckle is NOT resting
against the child car seat shell.
This is called 'buckle crunch'
and could cause the child
car seat to work loose or the
J
CAR&GO