Publicidad
Idiomas disponibles
Idiomas disponibles
VIII. PROGRAMMING YOUR WX-80, Continued
Factory Default Programming, Continued
is a pause of 40 seconds without a key press, the WX-80
will store current settings and return to operations mode.
This will ensure that the WX-80 is operational, should
there be any interruptions during your programming
setup.
The following programming instructions are broken
down by specific function. Each programming topic
ends by terminating the programming and returning to
standby or operating mode.
All programming functions can be set in one session
should you desire to program multiple functions before
returning to operations mode. The YES key is used to
accept the current display setting and will continue to
advance you to the next programming step, allowing
you to skip options that you do not wish to change.
1. Power the WX-80 weather monitor "on" by sliding
the on/ off switch to the left. You will hear a tone
to confirm power is ON.
2. Press the OFF/PROGRAM button for 2 seconds to
begin the programming mode. The display will
show the last selected weather channel (possibly
the default setting frequency).
3. Press the WEATHER button to activate the weather
audio, then push the volume up or down key to
10
Publicidad
Capítulos
