XI. USING THE ALERT FUNCTION
Test Mode, Continued
indicators will glow and "TESTMODE" will
display on the LCD.
2. Refer to the chart on next page, then press a number
key to test the desired function. The weather
monitor tunes to the corresponding channel,
and one of the following appears:
You Press:
The weather monitor displays:
1
CH. 1 (with Audio open)
2
CH. 2 (with Audio open)
3
CH. 3 (with Audio open)
4
CH. 4 (with Audio open)
5
CH. 5 (with Audio open)
6
CH. 6 (with Audio open)
7
CH. 7 (with Audio open)
8
DEFAULT (reset to factory settings)
9
DEMO ON or DEMO OFF
(the weather monitor's demo mode)
NOTE: If you pressed 9 in this step, your weather
monitor can also perform these test functions while
TEST MODE appears.
If you press ALERT, the weather monitor continuously
sounds its alert siren. Press ALERT again to turn off the
siren.
If you press YES, the STATEMENT, WATCH, and
WARNING LEDs light at the same time.
, Continued
33