Alert Tones - Maxon TRUTALK WX-80 SAME Instrucciones De Uso

VIII. PROGRAMMING YOUR WX-80
Entering FIPS Location Codes, Continued
Reminder: If you set the weather monitor to its multiple
location mode, the code (if any) stored in the next
memory position appears. Repeat Steps 3-6 for each
code (up to 15) you want to change or add.
To reset the weather monitor to receive ALL SAME
signals within a 50-mile radius, simply enter 99 in the
first memory location. The display will read: LOC 1 99.
When you press the YES button to store a code in the
last location cell (LOC 15), the display will advance to
the next programming step, Alert Tones.
7. Push the OFF/PROGRAM button for 2 seconds
to store the selection and set mode to operate.
The current alert status (WEATHER ALRT ON
or WEATHER ALRT OFF) appears on the display.
IX. ALERT TONES
You have the option to activate or turn off various types
of "geographically confined" weather event alert tones
received by your weather monitor. Optional alerts such
as "Avalanche Watch", "Coastal Flood Warning" and
"Volcano Warning" are naturally confined to their
geographical restrictions.
IMPORTANT NOTE: Weather alerts for unpredictable
, Continued
21