Publicidad
Idiomas disponibles
Idiomas disponibles
VIII. PROGRAMMING YOUR WX-80
Monitoring Single or Multiple..., Continued
2. Press the YES button three times so the word SINGLE
or MULTIPLE appears on the display.
3. To select the opposite setting (MULTIPLE rather than
SINGLE), press the NO button. The setting you
selected appears. Pressing the NO button
repeatedly will alternate the selection between
SINGLE and MULTIPLE until the YES button is
pressed.
4. Press the YES button to select the option of your
choice. The display will advance to the next
programming step, "Entering the FIPS Location
Codes". Whether you choose the SINGLE or
MULTIPLE location option, the first memory
location (LOC 1) and the FIPS Code stored will
now alternately flash on the display.
5. Push the OFF/PROGRAM key for 2 seconds to
store the selection and set mode to operate.
The current alert status (WEATHER ALRT ON
or WEATHER ALRT OFF) appears.
, Continued
18
Publicidad
Capítulos
