Tabla de contenido
Publicidad
Setting the clock
1.
Set unit in standby mode.
2.
Press and hold the "Folder up/Clk-adj " button (10) a second, The minute digit flashing on the LCD display(16). Press
skip up
or skip down
the correct minute.
3.
The hour digit will flashing, press the skip up
press " Folder up/Clk-adj " button (10) to store the correct hour.
The clock setting will automatically stored if no button is being pressed in a period of about 10 seconds
during clock setting mode.
To avoid the re-set of clock frequently when exchange the battery, please insert 2 pcs AAA size
(um-4) battery at the clock/alarm back-up battery compartment (30) in the direction as below
direction:-
Remark : Pull down the ribbon while insert the battery, this can help to release it easier when
changing the battery in the next time.
Listening to radio
Operation
1.
Turn on the unit by On/Standby button (6), unit defaulted on Tuner mode and the TUNER LED indicator (24) will light
up.
2.
Select the descried band by band switch (27)
3.
Turn the tuning knob (12) to set the station frequency as desired.
4.
adjust volume know (5) to the desired volume level.
Hints for best reception:-
-
FM : the receiver has rod antenna (26) hanging at the rear cabinet. this wire should be totally unraveled and
extended for best reception.
-
AM : the receiver has a built-in am bar antenna. If am reception is weak, slightly rotate or re-positioning of the unit will
usually improve the am reception.
FM-stereo reception
The FM-stereo LED indicator (23) will light up to show FM stereo program is receiving.
Playing CD/MP3 disc
Getting start
1.
Press Function button (4) to select CD mode.
2.
Open the CD compartment by pressing the CD door open/close (20). Put a CD disc into the compartment and close
the CD door.
3.
Focus search is performance if disc is inside. Total number of tracks is read.
Play / pause mode
1.
Press the " play/pause
2.
To interrupt, press the " play/pause
(16). Press again to resume normal playback.
Stop mode
1.
If Stop
button (14) is pressed during play or pause mode. Go to stop mode and display total number of track on the
LCD display (16).
Skip mode (skip up
1.
During play or pause mode, if skip up
then continuous the play or pause mode.
button (11) to set the correct minute. Press " Folder up/Clk-adj " button (10) to store
" button (13) to start playback, the first track will start playback.
" button (13) once, and the playing time will be freeze on the lcd display
/skip down
)
button (11) is pressed it will go to next track and display the track no. and
or skip down
button (11) to set the correct minutes. Then
2
Publicidad
Tabla de contenido
