How To Assemble - Dirt Devil M085806 Manual Del Propietário

HOW TO ASSEMBLE BODY TO NOZZLE
TOOL REQUIRED: PHILLIPS OR FLAT HEAD SCREWDRIVER
2.
1.
BACK VIEW
OF CLEANER
Assemble the body to the To secure, insert one (1)
base so that the lower hose screw into the back of the
is on the right side. cleaner, above the on/off
switch.
HOW TO ASSEMBLE TOOL CADDY
2.
1.
Align Tool Caddy holes with
Insert two (2) screws into
holes on handle. the holes and tighten until
secure.
HOW TO ASSEMBLE HANDLE TO BODY
2.
1.
Place upper handle onto Push upper handle down
upright. onto upright.
3.
Push back dirt window flap.
Align tabs on clear dirt pas-
sage window with the slots
on the lower hose cuff. Push
and turn to lock into place
(inset).
3.
Insert one (1) screw (sup-
plied) into the back of the
cleaner to secure handle.
6