IKAR HPL Manual Del Usuario Original página 26

GB
IKAR Personnel and Load Winch (PLW) as component:
The IKAR Man Riding and Load Winch (PLW)
is attached with the bracket IKAR 41-54 DWS
to one of the legs. Mount the bracket () in
such a way to the leg that the crank is in an
ergonomically convenient position for the
operator. The length (45.8 mm) of the provided
spacer sleeves allow for the correct clamping
stress of the bracket to be achieved. The torque
of the hex screws, grade 8.8 M10x75 is 49 Nm.
The securing rail must be positioned depending
on the size of the device. The torque of the
cylinder head bolts of grade 8.8 M8x40 is 20 Nm.
Introduce the IKAR PLW into the bracket. Secure
the IKAR PLW with cotter pin.
Attention: Only IKAR brackets may be mounted.
Only IKAR devices may be inserted into IKAR
brackets.
IKAR Tripod Type DB-A2 with IKAR PLW and HRA 18
including pulley wheels and karabiners
Preparation for operation
Approved supporting structure acc. to directive 2006/42/EC
for the IKAR Personnel and Load Winch
1
2
4
26
3
5