Af Measuring Beam Control - Metz Canon SCA 3102 M3 Manual Del Usuario

autofocus mode (see operating instructions for the
given camera).
Low-speed zoom lenses can significantly curtail
the range of the AF measuring beam!
The striped pattern of the AF measuring beam only
supports the central AF sensor of the camera. If
your camera has several AF metering areas, we
recommend to only activate the central one (please
refer to the camera's operating instructions).
If a decentral AF sensor is manually selected by the
photographer or autonomously by the camera, then
the AF measuring beam of the mecablitz will not be
activated. In this instance some cameras select the
AF illuminator integrated in the camera (please
refer to the operating instructions for the given
camera).
The following EOS camera models only activate the
camera-integrated AF illuminator: EOS 500, 5, 10,
10S, 5000, REBEL X, REBEL XS, A2, A2E, 888.
mecablitz 45 CL-4 and 60 CT-4:
These flash units of the SCA 300 system are
connected to the SCA 3102 adapter with the
"SCA 3000C" conecting cable (optional accessory).
The AF emitter integrated in the SCA 3000C takes
over the AF measuring beam function.
mecablitz 32 MZ-3, 40 MZ-... with
Power Grip G-16:
The above flash units can be converted into a
handle-mount flashgun with the Power Grip G-16
(optional accessory). The Power Grip G-16 is
connected to the SCA 3102 adapter with the
"SCA 3000A" connecting cable (optional
20