Maximum Flash Range Indication - Metz Canon SCA 3102 M3 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

on the camera. This arises particularly with manual
flash exposure correction, but it is irrelevant.
In the event that values transmitted by the camera
are to be subsequently changed manually, then
please refer to the operating instructions of the
mecablitz for the correct procedure.
The f-stop cannot be changed in the TTL and
M modes of the flash unit.
mecablitz 44 MZ-2, 54 MZ-..., 70 MZ-...
Generally, the LC display of the mecablitz does not
indicate the ISO value.
PowerShot G1
The PowerShot G1 does not transmit to the
mecablitz any aperture or ISO values. The
maximum flash range is therefore not indicated in
the mecablitz LC display. But this is of no
importance for correct E-TTL flash operation.
7. Flash ready indication in the camera's
viewfinder
An indicator lamp lights up when the flash unit is
ready for firing and a corresponding signal is
transmitted via the adapter to the camera. When
the camera's shutter release is touched the flash-
ready symbol
is displayed in the viewfinder,
thereby indicating that a flash will be fired for the
next picture.
The flash unit will not be triggered if a picture is
taken before the flash-ready symbol appears in the
viewfinder so that underexposure may result.
22

Publicidad

Tabla de contenido
loading

Tabla de contenido