Fb" Or "Feb" Flash Bracketing - Metz Canon SCA 3102 M3 Manual Del Usuario

Adjust switch
When using the digital cameras Powershot
Pro 90 IS, G1, G2, G3 and G6 flash exposure
corrections in the E-TTL flash mode must be
directly made on the camera. On account of
the camera's layout, the setting of a correction
value on the SCA adapter or mecablitz is not
possible or will have no effect.

13. "Fb" or "FEB" flash bracketing

In the TTL, E-TTL (only 54 MZ-...) and auto A
modes, flash bracketing can be performed with the
mecablitz 54 MZ-... and 70 MZ-5.
A flash bracketing series consists of three
successive flash shots with different flash
exposure correction values. No correction factor is
used for the first exposure. For the second shot a
minus correction factor, and for the third a plus
correction factor is set. The correction values only
concern the flash light! There is no correction for
the ambient light (background exposure). Flash
bracketing is automatically cancelled after the
third exposure.
For the flash bracketing setting procedure please
refer to the operating instructions for the given
mecablitz.
Note:
In the TTL and E-TTL modes flash bracketing with
different flash correction values is only possible if
the EOS camera permits corrections to be made on
the flash unit! Please refer to the operating
instructions for the given camera!
30
to +1/3.