Full Auto Flash Mode/Program Flash - Metz Canon SCA 3102 M3 Manual Del Usuario

required for mecablitz units of the SCA 3002
system, such as 44 MZ-2, 54 MZ-..., 70 MZ-...
Switch : 1
Switch : Manual flash exposure correction in
Switch : Manual flash exposure correction in
Display : Indicator for E-TTL flash mode
The figure shows the default setting of the
switches.

2.1 Full auto flash mode/Program flash

In the full auto flash mode the camera controls the
aperture and shutter speed so that in most lighting
situations optimal results are achieved with
mecablitz flashes, also in the fill-in flash mode.
Setting the camera:
Set the P" program mode or
"
(green square or Auto) on your EOS camera.
Setting the flash unit:
Set the TTL" or
"
(EM = Easy-Mode TTL; only on 40 MZ-3, 3i, 1, 1i /
50 MZ-5).
st or 2 nd curtain synchronisation
whole stop increments
1/3 stop increments
(only with 40 MZ-1i / 40 MZ-3i)
EM" mode on your flash unit.
"
SCA 3102-A
Full Auto Mode"
"
7