Digital Cameras - Metz Canon SCA 3102 M3 Manual Del Usuario

Full auto mode (green square) or "P".
"Automatic" must be selected in the camera's
menu when in the "P" mode!
Automatic flash mode A:
Setting on the mecablitz: A (Automatic)
Adjust the aperture on the mecablitz according to
the preselected camera aperture. We recommend
a film speed setting of ISO 200/24° on the camera.
But any film speed can be selected to match the
shooting conditions.
Setting on the SCA 3102:
The switch position is irrelevant.
The display
illuminate.
Manual flash mode M:
Setting on the mecablitz:
M (manual flash mode)
Set the "P" mode on the camera. Select in the
camera's menu an aperture that matches the
flash-to-subject distance (see aperture calculator
or LC-display of the mecablitz).
Setting on the SCA 3102:
The switch position is irrelevant.
The display
illuminate.

15.1 Digital cameras:

A) E-TTL flash mode
The digital cameras only support the E-TTL flash
mode (only possible with mecablitz 40 MZ-1i,
40 MZ-3i and 54 MZ-...) in the full auto mode (or
"AUTO"), program "P", "Av", "Tv" and in the
on the SCA 3102 does not
on the SCA 3102 does not
37