Please observe the remarks under 3.1 and
3.2 when using digital cameras !
Setting the SCA 3102 adapter:
The switch positions on the adapter and the display
are irrelevant when using the 3102 adapter
with the mecablitz 44 MZ-2, 54 MZ-... or 70 MZ-...
If the adapter is used with other mecablitz flash
units, the switches must be adjusted as follows:
• To select the mode of synchronisation set switch
to the left-hand position (first-curtain
synchronisation).
• The two switches
correction must be set to the
(default setting).
In most cases, the
mode (green square) of the camera and use of your
mecablitz in conjunction with the SCA 3102
adapter automatically ensure optimal flash
exposure of the subject.
Once the above settings have been completed you
can instantly start shooting.
Advanced amateur and professional photo-
graphers are advised to study the complete
instructions for the SCA 3102 adapter in order
to gain maximum benefit from the diverse
capabilities of the Metz mecablitz system and
the Canon EOS camera.
8
and
P" program mode and full auto
"
for exposure
0" middle position
"