Controlling Humidity - Boneco S250 Instrucciones De Uso

8
HANDLING
en

CONTROLLING HUMIDITY

The BONECO S250 is equipped with a hygrostat that con-
tinuously monitors the humidity in the room and regulates
the unit's operation. The adjustable range is between
30% and 70%.
1. Switch on the BONECO S250.
2. Use the and buttons to set the desired hu-
midity. The display shows the note
sired").
3. A few seconds after the last input, the display
changes back to
the current humidity again.
The BONECO S250 stops humidification once the desired
value is reached. Humidification continues automatically
as soon as the set value is no longer met.
REGULATING OUTPUT
The performance of the BONECO S250 is regulated in
two levels.
1. Press the
formance levels.
The selected level is shown on the display by the symbols
("High") and
("de-
The selected level does not affect the measurement or the
control functions of the hygrostat.
. The display now shows
button to switch between the two per-
("Low").