Getting Started - Kenwood DMX110BT Manual De Instrucciones

Getting Started

1
Turn the ignition key of your car to ACC.
The unit is turned on.
2
Press the <8MENU> button.
3
Touch [Setup].
4
Touch the corresponding key and set the value.
Audio
Sound Effect
Displays the Equalizer screen. (P.17)
Beep
Activates or deactivates the key-touch tone.
"ON" (Default), "OFF"
Loudness
Sets the amounts of boost of low and high tones.
"ON", "OFF" (Default)
Subwoofer
Displays the Subwoofer screen. (P.17)
Display
Touch
Adjust the sensing position of touch panel. See
"Touch panel adjustment" (P.4).
Display Mode
Select the screen mode.
"16:9" (Default), "4:3 Pan Scan"
Radio
Displays the Radio Settings screen. (P.12)
General
Language
Select the language used for the control screen and
setting items. Default is "English".
1) Touch [Language].
2) Select the desired language.
* You can change the page to display more items
by pressing [ ]/ [ ].
BT Auto Connect
The unit automatically reconnect when the last
connected Bluetooth device is within range.
"ON" (Default), "OFF"
Clock Setting
Adjust the clock time. (P.4).
Default
Touch [Default] to set all the settings to the initial
default settings.
5
Touch [6].
English |
3