GE GSM23YBP Manual De Uso Y Cuidado página 49

Ocultar thumbs Ver también para GSM23YBP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

About CustomCool™
On LCD
models
ExpressThaw™
ExpressChill™
(On some models)
How it Works
The CustomCool™ feature is a system of dampers,
a fan, a temperature thermistor and a heater. De-
pending on the function selected, a combination of
these will be used to quickly chill items, thaw
items or hold the pan at a specific temperature.
The pan is tightly sealed to prevent the pan's tem-
perature from causing temperature fluctuations in
the rest of the refrigerator.
How to Use
Empty the pan. Place the Chill/Thaw tray in
the pan. Place the items on the tray and close
the pan completely.
LCD Models:
Access by: Home > Options > Refrigerator
Options > CustomCool Pan
Non-LCD Models:
Select the ExpressThaw™, ExpressChill™ or
SelectTemp™ pad. The display and SET light
will come on. Tap the paduntil the light ap-
pears next to the desired setting. Use the fol-
lowing chart to determine the best setting to
use.
To stop a feature before it is finished:
For LCD Models: Go into that feature's
menu and press the OFF button.
For Non-LCD Models: Tap the feature's
pad until no options are selected and the dis-
play is off.
How to Remove and Replace the Drawer
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock posi-
tion.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the un-
lock position.
Place the sides of the drawer into the drawer
supports, making sure the swing locks fit on
the drawer slots.
Some CustomCool models feature a beverage cen-
ter. It is designed to store beverages at colder tem-
peratures. Select the Beverage Center pad if you
like to keep extra-chilled refreshments on hand.
The controls for this pan are located at the top of
the refrigerator with the temperature controls.
During ExpressThaw and ExpressChill, the
display on the controls will count down the
time in the cycle.
After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting (32°F
[0°C]) to help preserve thawed items until
they are used.
The displayed actual temperature of the
CustomCool pan may vary slightly from the
SET temperature based on usage and operat-
ing environment.
NOTE: For food safety reasons, it is recom-
mended that foods be wrapped in plastic wrap
when using ExpressThaw. This will help con-
tain meat juices and improve thawing perfor-
mance.
Lock all four swing locks by rotating them to
the lock position.
47

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido