GE GSM23YBP Manual De Uso Y Cuidado página 63

Ocultar thumbs Ver también para GSM23YBP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Trim kits and decorator panels.
For CustomStyle
models
Read these instructions completely and carefully.
Before You Begin
Some models are equipped with trim kits that allow you to install door panels. You can order
pre-cut black, white, bisque or stainless steel decorator panels from GE Parts and Accessories,
800.626.2002, or you can add wood panels to match your kitchen cabinets.
Panels less than 1/4
When installing wood panels less than 1/4
(3 mm) cardboard, that will fit between the face of the door and the wood panel. If you are installing the
pre-cut decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the
decorator or wood panel and the filler panel should be 1/4
"
Panels 1/4
(6 mm) thick or less
"
1/4
(6 mm) Max.
3/4
"
(19 mm) or Raised Panel
A raised panel design screwed or glued to a 1/4
can be used. The raised portion of the panel must be fabricated to permit clearances of at least 2
from the handle side for fingertip clearance.
Panels thicker than 1/4
(8 mm) of panel perimeter be no thicker than 1/4
Weight limitations for custom panels:
Fresh Food 38 lbs. (17 kg) max.
Freezer Door 28 lbs. (13 kg) max.
Panels thicker than 1/4
"
5/16
"
1/4
"
3/4
(19 mm)
"
(6 mm) thick
"
(6 mm), up to 3/4
"
(6 mm)
(8 mm)
(6 mm) Max.
"
(6 mm) thick, you need to create a filler panel, such as 1/8
"
(6 mm).
"
(6 mm) thick backing, or a 3/4
"
(19 mm) maximum, will require that the outer 5/16
"
(6 mm).
"
2
(5.1 cm)
Clearance
Handle Side
Appearance
Panel
"
"
(19 mm) routed board
"
(5.1 cm)
"
"
1/4
(6 mm)
Thick Backing
"
3/4
(19 mm)
Refrigerator
Door
61

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido