Unpacking And Assembly; Lifting And Transporting The Work Vehicle - Checchi & Magli PLASTIC - STOP PLUS Serie Manual De Uso Y Mantenimiento

Unpacking and assembly

The assembly of the work vehicle must be carried out
at an authorised service centre or at company facilities
equipped with appropriate equipment and suitably
trained personnel, in order to guarantee safety during
unpacking and installation.
During unpacking, check that the components are in

Lifting and transporting the work vehicle

Danger - Warning
Lift the work vehicle using appropriate hoisting
means for the load to lift.
Check the weight of the mulching machine, or the
mulching machine coupled to the planting machine,
in the "Technical information" section.
The illustration shows the mulching machine harnessing points and lifting procedure.
D
UN41 0232IH
To lift the work vehicle, proceed as follows.
1) The specific tool (A) provided with the work vehicle
for lifting.
2) Strap up the work vehicle as shown in the figure.
3) Check that the pin (B) is secured by the lock pin (C)
and that the chains are fastened stably to the frame
(D).
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
A
11
good condition and tally with the number stated; in the
event of damage, report the damage to the retailer or
directly to the manufacturer within 8 days of receiving
the machine.
The packing materials must be appropriately disposed
of or recycled in accordance with the laws in force.
Danger - Warning
During lifting and handling operations anyone not
involved must keep a safe distance.
D
4) Lift the work vehicle and place it on the means of
transport.
5) Anchor the work unit to the means of transport with
ropes and secure the wheels with wedges.
6) Affix the relative signalling signs to any parts jutting
out from the means of transport.
4
Use and maintenance