Function Test Mode - Citizen CT-S851II Manual De Usuario

4.4 Function Test Mode

Press and hold button 1 while turning on the printer to access the function test
mode.
Use button 3 (
Except for the self test and printing memory switch settings, all functions are for
service personnel only. Do not operate those functions.
Self test
1. While paper is load ed, press and hold button 1 while
turning the power on.
The function test mod e starts and "Self test" app ears
on the LCD.
2. Press button 4 (
Self test starts. The printer prints its mo del name,
version , DIP switch setting s, me mo ry switch settings, and a list of built- in fonts.
Note:
*: Printers with a USB interface do not have DIP switches, so the DIP switches all appear off on the
self test printout.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
) to select a function, use button 4 (
).
Firmware version
Interface
Serial communication
status
(USB or Serial interface
models only)
Buffer size
V10 CONSUMIBLES S.L.
) to execute the function.
FEED
— 44 —
DIP switch
settings*
(USB or Serial
interface models
only)
Memory
switch
setting