Long Life Print (Llp) Function Settings - Citizen CT-S310II Manual De Usuario

3.6 Long Life Print (LLP) Function Settings

The service life of the prin t head was increa sed by redu cing the pressure that it
contacts the paper.
Long Life Print (LLP) is enabled by changing the positions of the lever switches
inside the paper cover.
1. Turn off the power.
2. Pull the cover open lever forward and open the pap er cover.
3. Use a screwdriver or other pointed obje ct to press the lever switches on both sides
in the direction of the A arrows and lower them in the direction the B arrows .
Lower the lever switches on the left and right sides one at a time from the standard
to the LLP position.
4. Close the paper cover until you hear a click so it is secure.
B
CAUTION
Be careful not to touch the opening for the auto cutter while the paper cover is open.
The print head is hot immed iately after prin ting. Do not touch it.
Do not touch the print head with bare hands or metal objects.
Both the rig ht and left side lever switches must be set in the same position .
The print out may be lig hter when this setting is enab led. If necessary, increase the
print density or use a paper that has goo d color develo pmen t.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
— 24 —
V10 CONSUMIBLES S.L.
B
Standard
LLP
(Front view of lever switch)