Hexadecimal Dump Printing - Citizen CT-S801II Manual De Usuario

4.6 Hexadecimal Dump Printing

Print received data in hexadecimal. If problems such as missing or duplicated
data occur, this function allows you to check whether or not the printer is
receiving data correctly.
How to do hexadecima l dump print ing
1. Load paper.
2. While the paper cover is open, press and hold button 1 while turning the power on,
and then close the paper cover.
Enter HEX dump prin t mode.
3. The printer prin ts "HE X dump print mo de" follow ed by the received data printed in
hexadecimal numbers and some characters.
How to stop hexadecima l dump pri nting
Do one of the following to stop printing.
 Press button 1 (FEED) three times in a row
 Turn off the power
 Receive a reset command from an interface
CAUTION
 The printer prints "." if there is no character corresponding to the data.
 None of the commands function during hexadecimal dump printing.
 If print data does not cover a complete line, press button 1 (FEED) to advance the
paper.
Print example
HEX dump print mode
61 62 63 64 65 66 67 0A 0D 0D 0D 0D abcdefg.....
0D 0D 0D
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
— 52 —
V10 CONSUMIBLES S.L.
.....