DETAILED SET UP
Unpack the humidifier
1.
Open box and remove the packing material.
2. Remove any packaged literature on top.
3. Remove the unit from the carton.
4. The DUET is fully assembled. Place the
unit on a table.
Fill Reservoir
NOTE: Follow Cautions on page 5 regarding addi-
tives to water.
The DUET has been designed to allow for
either sink-fill or pour-in filling. The total tank
capacity is 1.2 gallons.
1.
For sink fill, lift off the lid and grasp the
plastic inner handle to take the tank to the
sink.
2. For pour-in method, simply remove the lid,
and use a pitcher to pour water into the
tank.
3. When placing the tank onto the base, care-
fully align the tank edges to the base. The
bottle should fit against the base closely,
without large gaps.
LOCATE PLACE FOR YOUR HUMIDIFIER
1.
Once the unit is assembled and filled, posi-
tion the humidifier where humidity is most
needed. (See Positioning Tips).
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
Tips for Positioning
• On a level surface.
• Avoid aiming mist directly at
young children or pets.
• Not too near wall, ceiling or
wooden surfaces that could
be damaged by water con-
densation.
• Not next to a thermostat or
hot air vent.
• Not by a window (to avoid
condensation).
• Do not aim mist toward elec-
tronics.
6