Sauder 412923 Manual Del Usuario página 18

Step 14
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOOR may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
å
To adjust the DOOR from side to side (horizontal), loosen the mounting screw several turns, then turn the adjusting screw
å
in or out. Tighten the mounting screw after making adjustments.
To adjust the DOOR up and down (vertical), loosen both vertical adjustment screws. Move the DOOR up or down to the
å
desired location. Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed.
å
Tighten the mounting screw after making adjustments.
Page 18
Mounting screw (depth)
(vertical adjustment)
412923
Adjusting screw (horizontal)
www.sauder.com/services