Safety Information - Hammerhead SWITCH HHS1200 Manual De Instrucciones



sAfETY INfORMATION

Please read and understand this entire manual before attempting to assemble or operate
this product. If you have any questions regarding the product, please call customer service
at 1-888-HaMMErHEaD (1-877-888-1880), 8 a.m. - 8 p.m., EST, Monday – friday.

WARNING
• The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. before beginning power-tool operation, always
wear safety goggles or safety glasses with side shields and a full-face shield, when
needed. We recommend using a wide vision safety mask over eyeglasses or standard
safety glasses with shields. always use eye protection marked to comply with aNSI Z87.1.
• Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
— Lead from lead-based paints.
— Crystalline silica from bricks, cement, and other masonry products.
— arsenic and chromium from chemically-treated lumber.
• Your risk from these exposures varies, depending upon how often you do this type of
work. To reduce your exposure to these chemicals:
— Work in a well-ventilated area.
— Work with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.
— avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with
soap and water. allowing dust to get into your mouth or eyes or to lie on the skin may
promote absorption of harmful chemicals.
SWITCH™_12V rIgHT aNgLE IMPaCT DrIVEr – auTO HaMMEr
3