Hammerhead SWITCH HHS1200 Manual De Instrucciones página 6


sAfETY INfORMATION
• If devices are provided for the connection of dust extraction and collection facili-
ties, ensure these are connected and properly used. use of dust devices can reduce
dust-related hazards.
Power Tool Use and Care
• Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and more safely at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn it on and off. any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, break-
age of parts and any other condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control;
• Use the power tool, accessories, tool bits, etc. in accordance with these instruc-
tions, taking into account the working conditions and the work to be performed.
use of the power tool for operations different from those intended could result in a
hazardous situation.
6
SWITCH™_12V rIgHT aNgLE IMPaCT DrIVEr – auTO HaMMEr