Manuales relacionados para Serta Back In Motion 44187
Resumen de contenidos para Serta Back In Motion 44187
- Página 1 Back In Motion Chair ™ Silla Back In Motion ™ Assembly Instructions Instrucciones de Ensamblaje Model/Modelo: 44187...
-
Página 2: Important Safety Information
About the Back In Motion: While seated, the seat and lumbar are fixed together on a tilting axis that allows you to rotate your pelvis while flexing the muscles of the core. It is designed to allow you to articulate the spine and perform pelvic tilt exercises. * Note: Before placing your full weight onto the chair, ensure you are fully positioned against the back cushion (Z) and not sitting on the front edge of the seat, as the front edge is designed to tilt forward. - Página 3 Parts / Partes Casters Star Base Gas Lift with Telescoping Cover Seat Plate Ruedas Base en forma de estrella Elevador neumático y cubierta Mecanismo del asiento telescópica Quantity/cantidad: 5 Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 Left Arm Right Arm Seat Cushion Lumbar Cushion Brazo izquierdo Brazo derecho...
-
Página 4: Small Screws Tornillos Pequeños De 25Mm
Back Cushion 1” Small Screws 7/8” Big Screws 1-1/4” Big Screws Cojín del respaldo Tornillos pequeños Tornillos grandes de Tornillos grandes de de 25mm 22mm 32mm Quantity/cantidad: 1 Quantity/cantidad: 9 Quantity/cantidad: 2 Quantity/cantidad: 6 Allen Key Llave allen Quantity/cantidad: 1 Step 1 Step 2 Place the Star Base (B) upside down and insert... - Página 5 Step 3 Step 4 Align the Lumbar Cushion (G) with the Seat Cushion (F) by Attach the Arms (E1 & E2) to the bottom of the Seat Cushion (F) by using 1” Small Screws (I) in the arm holes with the Allen positioning the Lumbar Cushion (G) between the Seat Cushion (F) and the back support plate, attach by using 1”...
- Página 6 FRONT FRONT Step 5 Step 6 Attach Seat Plate (D) to the bottom of the Seat Cushion (F) Attach the Back Cushion (H) to the Seat Cushion (F) using (with the FRONT of seat plate facing the FRONT of seat cushion). 1-1/4”...
- Página 7 Step 7 Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift with Telescoping Cover (C) into the center hole of the Seat Plate (D). Paso 7 Coloque la silla ensamblada verticalmente, con la plancha del asiento hacia abajo. Inserte el elevador neumático con la cubierta telescópica (C) en el hoyo central de la mecanismo del asiento (D).
-
Página 8: Function Instruction
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle while seated. The chair will descend until the handle is released or the chair reaches the bottom position. -
Página 9: Para Ajustar La Tensión Del Mecanismo Deinclinación
Function Instruction - 3 To Operate Tilt Lockout: While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the center of the chair) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the center of the chair. - Página 10 Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
-
Página 11: Garantía Limitada
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así...