Manuales relacionados para Serta 46241
Resumen de contenidos para Serta 46241
- Página 1 Fusion Serta Ergonomic ® Mesh Chair Silla de malla ergonómica Serta ® Assembly Instructions Instrucciones de ensamblaje MODEL / MODELO 46241 Soporte m ximo á de la silla: 136 kg 300 lbs...
-
Página 2: Instrucciones De Ensamblaje
Chair Assembly Instructions Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. - Página 3 PARTS/PARTES PARTS/PARTES Casters Star Base Gas Lift with Telescoping Cover Seat Plate Ruedas Elevador neumático y cubierta Base en forma de estrella Mecanismo del asiento telescópica Quantity/cantidad: 5 Quantity/cantidad:1 Quantity/cantidad: 1 Quantity/cantidad: 1 Seat Cushion Back Cushion 3/4” Small Screws 1”...
- Página 4 Step 1 Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the Star Base (B). Paso 1 Ponga la base en forma de estrella (B) con las patas hacia arriba y inserte las 5 ruedas (A) en los hoyos situados en la base (B).
- Página 5 Step 3 Attach Seat Plate (D) to the bottom of the Seat Cushion (E) (with the front of the seat plate facing the front of seat cushion). Attach by using 3/4” Small Screws (G) for the holes of the Seat Plate (D) and tighten screws. *Note : Tighten the screws completely.
- Página 6 Step 4 Insert the back support plate of the Back Cushion (F) into the bracket of Seat Plate (D), line up the holes on both back support plate of the Back Cushion (F) & bracket of Seat Plate (D), secure with 1” Big Screws (H). * Note : Tighten the screws completely.
- Página 7 Step 5 Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift with Telescoping Cover (C) into the center hole of the Seat Plate (D). Paso 5 Coloque la silla ensamblada verticalmente, con la plancha del asiento hacia abajo.
- Página 8 Step 6 Release arms to the horizontal position. Now the chair is ready for use. Paso 6 Liberar los brazos a la posición horizontal. Ahora la silla está lista para su uso.
-
Página 9: Function Instruction
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height : While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. - Página 10 Function Instruction - 2 To Operate Tilt Lockout : While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the seat plate) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the seat plate.
- Página 11 Function Instruction - 3 To Adjust Tension On The Tilt : Reach under the front center of the chair, grasp the round knob (R) and turn it counter- clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user.
- Página 12 Function Instruction - 4 To Adjust Arms : This chair has an adjustable arm function so the arms can be pushed up or pulled down. The arms can be pushed up next to the back cushion so the chair can easily roll under a desk. Instrucciones de Funcionamiento - 4 Para ajustar los brazos : Esta silla cuenta con una función de brazos ajustables, por lo...
- Página 13 Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt.
- Página 14 Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así...