Manuales relacionados para Serta 44425
Resumen de contenidos para Serta 44425
- Página 1 Executive Chair Silla Ejecutiva Assembly Instructions Instrucciones de Ensamblaje Model/ Modelo: 44425...
- Página 2 Parts/Partes Casters Star Base Gas Lift with Telescoping Cover Seat Plate Ruedas Base en forma de estrella Elevador neumático y cubierta Mecanismo del asiento telescópica Quantity/cantidad: 5 Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 Back Cushion Left Arm Right Arm Seat Cushion Cojín del respaldo Cojín del asiento Brazo izquierdo...
- Página 3 2-1/4” Screws 2-3/8” Screws 1” Screws Tornillos de 57mm Tornillos de 25mm Tornillos de 60mm Quantity/cantidad: 8 Quantity/cantidad: 2 Quantity/cantidad: 2 Allen Key Black Plastic Caps Llave allen Tapas plásticas negras Quantity/cantidad: 1 Quantity/cantidad: 4 Step 1 Step 2 Place the Star Base (B) upside down and insert 5 Casters (A) into Turn the Star Base (B) over and insert the Gas Lift with Telescoping the holes on the Star Base (B).
- Página 4 Step 3 Step 4 Attach Seat Plate (D) to the bottom of the Seat Cushion (F) (with Attach the Arms (E1 & E2) to the bottom of the Seat Cushion (F) the front of the seat plate facing the front of seat cushion). Attach by using 2-1/4”...
- Página 5 Step 5 Step 6 Place the assembled Seat Cushion (F) with Seat Plate (D) Place the Back Cushion (G) onto the Seat Cushion (F) to start on top of the Gas Lift with Telescoping Cover (C) and press the back cushion assembly. Two people are recommended for down until fully engaged.
- Página 6 Step 7 Step 8 Attach the Back Cushion (G) onto the Arms (E1 & E2) by using Place the Black Plastic Caps ( L ) into arm holes once screws 2-1/4 Screws (J). Tighten all the screws completely. Fold over have been tightened.
- Página 7 Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height.
- Página 8 Function Instruction - 2 To Adjust Arm Height: Press the buttons on the chair arms. Press the buttons to allow the arms to move up or down freely then release the buttons once the desired height is reached. Instrucciones de Funcionamiento - 2 Para ajustar la altura de los brazos: Presione los botones de los brazos de la silla.
- Página 9 Function Instruction - 3 To Operate Tilt Lockout: While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the seat plate) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the seat plate.
- Página 10 Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt.
-
Página 11: Garantía Limitada
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así...