Installation Instructions - Festo CPX Manual Del Usuario

3

Installation instructions

3.1 Mounting
The CTEL master module is designed for mounting in a CPX
interlinking block.
Warning
Switch off the power supply before dismantling or
mounting the CTEL master module (danger of operative
malfunctions or damage).
1
Screws, tightening
torque 0.9 ... 1.1 Nm
2
CTEL master module
3
Interlinking block,
here, for example,
with additional
power supply
Dismantling:
• Remove the screws and carefully lift up the control
block.
18
1
Festo CPX-CTEL-Z6 1411a English
1
2
3