User Information - Festo CPX Manual Del Usuario

English
1

User information

The module CPX-CTEL-4-M12-5POL has been designed
exclusively for the control of pneumatic and electric actu­
ators, for interrogating sensor signals by means of input
modules and for communication via I-port.
The specified limits for technical data must be adhered to.
Detailed information can be found in the description for
the CPX-CTEL-Master (P.BE-CPX-CTEL-...) and the CPX-sys­
tem description (P.BE-CPX-SYS-...).
Warning
• Switch off the power supply before assembling or
disassembling modules or plugging plug connectors
together or separating them (danger of operative
malfunctions or damage).
• Use only power units which guarantee reliable
electrical isolation of the operating voltage as per
IEC/DIN EN 60204-1. Observe also the general
requirements for PELV circuits.
• Connect an earth conductor of sufficient cable cross
section to the connection of the CPX terminal marked
with the earth symbol.
• The CTEL master includes electrostatically sensitive
devices. Therefore, do not touch any components.
Observe the handling specifications for
electrostatically sensitive devices.
Note
Only commission a CPX terminal which has been
mounted and wired completely.
Festo CPX-CTEL-Z6 1411a English 15