Turning On The Power - Panasonic PT-LC76U Instrucciones De Funcionamiento

Turning on the power

Before turning on the power
1, Ensure that all components
are connected properly.
2, Connect the accessory power cord.
3, Remove the lens cover.
$
POWER
INPUT
VIDEO RGB
&
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
(
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
Lens cover
Press the MAIN POWER switch to turn on the
#
power.
BThe power indicator on the projector will illuminate red.
$
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
%
Turn on the power of all connected devices.
BStart the Play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard while the power indicator is turned off,
but this is not a sign of a malfunction.
22-E
NGLISH
power cord
#
Power indicator
)
*
'
& Press the input select button to select the
input signal.
Input select
buttons
RGB1
Changing
signals
S-VIDEO
BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Adjusting the angle
'
BWhile pressing the adjuster
buttons, adjust the forward/back
angle of tilt of the projector.Adjust
so that the projector is as vertical to
the screen as possible.
Press the AUTO SETUP button to initiate
(
automatic positioning.
BThe tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 26 for details.)
) Adjusting the size
BTurn the zoom ring to adjust the size of the projected image.
Adjusting the focus
*
BTurn the focus ring to adjust the focus of the projected image.
VIDEO RGB
RGB2 VIDEO RGB1
VIDEO S-VIDEO RGB2
AUTO SETUP
E
NGLISH
-23