Troubleshooting - Walgreens BD-7181W Manual De Usario

Troubleshooting

Error/Symbol What Does It Mean?
Monitor may have been
inflated without the cuff
around the arm OR
Cuff may not be
positioned correctly on
the arm.
The cuff tube may be
folded OR You may have
moved while the cuff was
inflating.
You may have moved
or spoken during the
measurement process.
You may have been
startled by a noise or
vibration while
measuring.
22
How To Fix It
Read page 16 (Applying
the Cuff).
Read pages 14 & 15
(Important Reminders).
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
Troubleshooting
Error/Symbol What Does It Mean?
You have been ignoring
the flashing replace
battery symbol (
The batteries have run
down.
Blood pressure Cuff may not be
value seems too aligned correctly.
high or too low
Blood pressure Circuitry locked.
value seems too
high or too low
Unable to take a The cuff may not be
measurement after positioned correctly.
receiving an error
symbol.
How To Fix It
Replace with four new
"AA" alkaline batteries.
). Make sure the polarities
are positioned correctly
in the battery
compartment before
continuing to measure
your blood pressure.
Replace with 4 "AA"
batteries so you may
continue to measure
your blood
pressure without any
interruptions.
Read page 16 (Applying
the Cuff).
Remove then reinsert
the batteries and then
proceed to take
measurement again.
Read page 16
(Applying the Cuff).
23