AC Capability and Adapter
This Walgreens blood pressure monitor is equipped with AC
capability should you choose to use electric power instead of
batteries to operate your unit.
Use only the authorized AC adapter included with your
monitor. Use of any other adapter may cause damage to the
monitor and will void the user warranty. For warranty or
replacement information refer to pages 24-25.
AC Adapter Output: 6V DC 1A
*It is suggested that you remove the batteries from the compartment if you are going to use
an AC adapter for an extended amount of time.
12
Selecting Time and Date
Your Walgreens monitor will keep track of the time and date
unless the batteries have run down or are removed from the
monitor.
•
Press the MODE button on the unit. The month will begin to
flash. Press the
(Up) or
correct month appears on the display.
•
Press the MODE button once again to store and now the
day will begin to flash. Press the
button until the correct day appears on the display.
•
Press the MODE button to store and the hour will begin to
flash. Follow the same process as setting the month and
day to set the hour and minute.
Once you have selected the minute, press the MODE
•
button. The unit will now display the time and date.
(Down) button until the
(Up) or
(Down)
13