Graco CONTENDER 65 Manual De Instrucciones página 82

Lap Belt Installation
Always review your vehicle owner's manual for specific information
about your vehicle seat belts.
Grab the sides of the seat
at the belt path and slide
the seat side-to-side and
front-to-back. The seat
should not move more
than 1" (2.5 cm).
Locking Latch Plate and No Retractor
When installing the car seat, route the lap seat
belt through the proper path and buckle it in.
Then, pull upwards on the tail of the belt so that
the lap belt gets tight around the car seat.
Sewn On Latch Plate and ALR
Slowly pull the lap belt all the way out. Route
the vehicle seat lap belt through the proper belt
path and buckle it in. Then, pull the lap belt tight
while feeding all the slack back into the retractor.
82 82