Black 7/8" Machine Screw - Sauder 427287 Manual De Instrucciones

Step 43
å
Insert a SLIDE CAM (10A) into the SMALL DRAWER SIDES (D20 and D21).
å
Fasten a DRAWER RIGHT (40CC) to the SMALL RIGHT DRAWER SIDE (D20)
and a DRAWER LEFT (40CD) to the SMALL LEFT DRAWER SIDE (D21). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #2 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in
the SLIDE.
å
Fasten one PULL (35K) to the SMALL DRAWER FRONT (M). Use two
BLACK 7/8" MACHINE SCREWS (37S).
3
4
37S

BLACK 7/8" MACHINE SCREW

(4 used for the PULLS)
www.sauder.com/service
Roller end
1
2
D21
M
35K
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
427287
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D20
3
4
3S
5
x2
10A
Roller end
1
2
Drawer Slide
Center the screw in the oval hole.
Page 49