Appliance Description - Beurer MG 146 Instrucciones Para El Uso

5. Appliance description

Shiatsu massage pillow (front)
2
3
6. Start-up
• Remove the packaging
• Check the device, power supply and cables for damage.
• The device can be used with or without a cover.
• Connect the device to the mains power supply.
• Route the cable safely so that there is no risk of anyone tripping over it.
7. Operation
To start with, gently press the part of your body you wish to massage against the massage device. Then make
sure that you are in a comfortable position before gradually shifting your weight onto the massage device.The
massage must be pleasant and relaxing at all times. Stop the massage or change your position or the contact
pressure if you find it is painful or unpleasant.
• Do not trap or squeeze any part of your body, especially feet, hands and fingers, between the rotating mas-
sage heads and their mountings in the device.
• Switch on the massage device with
time. Press the -button again to switch the device OFF.
Note
• The device is more comfortable if used with the included cover.
• Do not use the massage device for longer than 15 minutes. Otherwise, using the device for longer
can over-stimulate the muscles and cause tension instead of relaxation.
Back massage: upper back
area
1
1 Four massage heads, rotating in pairs
2 -Button, 3-level
a) Switch on massage function
b) Switch on light and heat
c) Switch device OFF
3 Power plug
-button. To switch on light and heat, press the
Back massage: lower back area
(lumbar vertebrae)
10
-button a second
Leg massage