Electrical - Warn VRX Serie Manual Del Usuario

STEP 3: MOUNT YOUR REMOTE EQUIPMENT
1. Disconnect the vehicle battery cables,
negative terminal first. All work with
electrical wires and cables must be
completed with the battery completely
disconnected from the vehicle wiring.
HANDLEBAR SWITCH MOUNTING
VRX
REMOTE SOCKET MOUNTING
AXON
VRX
DASH SWITCH MOUNTING
VRX 45 - AXON 45 / 55
MOUNTING
WARNING TO AVOID INJURY AND PROPERTY
DAMAGE: Use caution if moving or repositioning the
vehicle controls so as to not compromise the safe
operation of the vehicle.
Select a mounting position that will provide clearance
for all vehicle controls.
Before securing the switch cable with tie wraps, make
sure that the handlebars have full range of motion.
AXON
36.8mm
(1.45in.)
21.1mm
(.83in.)
Not to scale. Do NOT use as a template!
WARN INDUSTRIES
5
ELECTRICAL CONNECTIONS
Never mount contactor with electrical
WARNING
terminals touching metal objects.
Optional
Always remove jewelry and wear eye
WARNING
protection when making battery connections.
Never route electrical cables through or
WARNING
near moving parts.
WARNING
exposed wiring and electrical terminals.
3.6-3.9 Nm
32-34.5 lb-in
STEP 4: MOUNT YOUR CONTACTOR (VRX Winch Only)
WARNING
fuel tank, brake lines, electrical wires, etc., when
drilling.
CONTACTOR MOUNTING
(VRX Winch Only)
STEP 5: WIRING YOUR EQUIPMENT
terminal boots on wires and terminals.
across sharp edges.
Always insulate and protect all
parts that get hot.
battery terminals.
VRX 25 / 35
Red
Blue
Black
Brown
Black
Green
Red Red
WARN INDUSTRIES
6
Always verify area is clear of fuel lines,
Always place the supplied
WARNING
Never route electrical cables
WARNING
Never route electrical cables near
WARNING
Never route electrical cables over
WARNING
Yellow
Remote Socket
(optional)