Maintenance; Change Main Filter; Change Hepa Filter; Ordering Spare Parts - Nederman FilterBox 10M Manual De Instrucciones

5

Maintenance

WARNING! Risk of personal injury.
• Disconnect all power to the product before any maintenance.
• Wear goggles, dust mask and gloves.
• Use proper equipment, such as a vacuum cleaner, to clean the product
before taking it apart.
• Take apart the product in a well-ventilated room.
• Clean the area properly after work is complete.
Use only original Nederman spare parts. Please contact your nearest authorized
dealer or Nederman for advice on technical services.
5.1 Change main filter
WARNING! Risk for personal injury.
Wear goggles, dust mask and gloves when changing the filter cartridge.
Change the main filter if its surface becomes punctured, or if the filter is so
dirty that it cannot be sufficiently cleaned despite being cleaned repeatedly. See
figure 13.
NOTE!
See Figure 13, item 7. The new filter is supplied with a new plastic
bearing (X), which can be substituted for the existing bearing if it is damaged.
5.2 Change HEPA filter
WARNING! Risk for personal injury.
Wear goggles, dust mask and gloves when changing the HEPA filter.
If FilterBox cannot filter out dust properly even with a new main filter, and
after repeated cleaning, the HEPA filter may need to be changed. The LCD
display indicates when the HEPA filter needs to be replaced.
Replace the HEPA filter according to figure 14. Check that the air flow is
sufficient.
5.3 Spare parts
Contact your nearest authorized distributor or Nederman for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.

Ordering spare parts

When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
FilterBox EN
23