Publicidad
EN
A - Headrest
B - Cover
C - Shoulder belt guides
D - Lap belt guides
E - Headrest adjustment buttons
F - ISOFIX connectors*
G - ISOFIX connectors release button
H - Storage compartment for the manuals
I - ClickAssist
J - Battery compartment
*We recommend you to always use your Bébé Confort Kore
Pro i-Size with the ISOFIX connectors when your vehicle is
equipped with it.
SAFETY
General instructions Bébé Confort Kore Pro i-Size
1. The car seat is for car use only.
2. The car seat is developed for an intensive use of
approximately 10 years.
3. We advise to check the expanded polystyrene (EPS)
parts regularly for damages.
WARNING:
Check that the child seat is properly installed. It is
important for your child's safety that you fit the belt
correctly. The vehicle belt must be fixed along the
appropriated markings/ positioning points on the seat.
Please also read the label on the side of the car seat.
Never fit the belt in any way other than as shown. If in any
doubt about the correct installation or use of the system,
the user is advised to contact the distributor or the
manufacturer of the child restraining device system.
I
I
26
Kore Pro i-Size
Bébé Confort
Bébé Confort Kore Pro i-Size in the car
1. After purchasing, install the seat in your vehicle. If
you encounter any installation problems, contact your
distributor immediately (prior to use).
2. Use the car seat only on a front-facing seat that is fitted
with an automatic or static 3-point belt that has been
approved according to the ECE R16 standard or similar. Do
NOT use a 2-point belt.
3. Remove the car seat headrest if it stops you from
adjusting the headrest of the car seat to the desired
height.
4. Make sure to replace the headrest of the back seat of
your vehicle when you remove the car seat.
5. The car seat back support cannot be removed to ensure
optimum safety.
Batteries 2006/66/EC
The cross symbol on the device indicates
that the batteries, at the end of their life,
must be disposed of in accordance with
the regulations in force.
WARNING:
• The Bébé Confort Kore Pro i-Size must only be installed in
the car in a forward-facing position.
Your child in The Bébé Confort Kore Pro i-Size
1. Make sure the headrest is adjusted to the proper height.
2. Tell your child not to play with the seat belt buckle and
to keep its head against the headrest.
Maintenance instructions
The EPS parts of the headrest and backrest may not be
removed.
Publicidad
