Engine Operation - STERWINS PCS 38 Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

· REFUELING OF THE UNIT

1. Unscrew and remove the fuel cap. Leave the cap on a clean place.

2. Place the fuel in the fuel´s tank at 80% of its capacity.

3. Replace the fuel´s cap in a safe way and clean any fuel escape around the unit.

WARNING

1. Select a clearance for the refueling.

2. Move away at least 10 feet (3 metres) from the refueling point before starting the engine.

3. Stop the engine before refueling the unit. At this moment, make sure that you shake the

mixed fuel in the container properly.

· TO MAXIMIZE THE ENGINES LIFE, AVOID:

1. FUEL WITHOUT OIL (ONLY FUEL) – It will very quickly cause a severe damage in the

internal parts of the engine.

2. OIL FOR USE OF 4 STROKE ENGINES – It can cause irreparable damages.

3. Mixed fuels that have been left without use for a period of a month or more can rot the

carburator and the engine will not work properly.

4. In case of storage of the chainsaw during a long period of time, empty the fuel tank. Then

start the engine until it stops to empty the carburator and its conduits.

5. In case of disposing of the mixed oil, throw it away only in an authorized place.

· CHAIN´S OIL

Use engine oil SAE 30

Note: Do not use used oil since it can cause damages to the oil pump.