Troubleshooting Guide - STERWINS PCS 38 Manual De Instrucciones

TROUBLESHOOTING GUIDE

Case 1. Do not start on
Check that the fuel is not in a bad
state.
Check that the fuel does not leak
from the exhaust
Check that there is spark in the
plug.
Case 2. Not enough power/ Poor accelerator/ Unequal idle speed
Check that the fuel is not in a bad
state.
Check that the air´s filter and the
fuel´s filter are not dirty.
Possibly the carburettor is not been
fitted properly.
Case 3. Does not lubricate
Check that the lubrications orifices
are clean
If it seems that the chainsaw needs an additional maintenance, please take it to the nearest
Garland service.
Replace it with a suitable fuel.
Remove and dry the spark plug.
Replace it with a new plug.
Replace it with a suitable fuel.
Clean them.
Take it to the technical service so
they can fit the needles of the
carburettor
Clean them.
40