– Do not remove all the callus skin in order to retain the natural protection of the
skin.
– Always ensure that the spindle can rotate freely. It must never be permanently
jammed, otherwise the instrument will become too hot and suffer damage.
– After every use, apply moisturizing cream to the parts treated.
Important:
Check the results during treatment. This is particularly important for
diabetics, since their hands and feet are less sensitive.
3.2 Attachments
Since the attachments are of a high quality and improper use can lead to injury,
we ask that you handle the attachments carefully. At high speeds in particular,
we advise that you proceed with caution.
The following attachments are included:
A – Sapphire cone
Removal of dry skin or calluses from the soles of the
feet and from the heels and for manicuring the nails.
B – Felt cone
Smoothing and polishing the edge of the nail after
filing as well as for cleaning the nail surface. Always
polish in circular movements and do not allow the
felt cone to rest in one place, otherwise friction could
cause heat to develop.
C – Sapphire disk, fine
Filing and treatment of the nails, fine grained sapphire
disk.
The specific aspect of this sapphire disk is that only
the inner disk rotates, while the outer support is sta-
tionary. This enables precise filing of the nails without
the risk of burning the skin with the fast rotating disk.
D – Cylindrical milling cutter
Grinding of lignified foot nail surfaces as well as
smoothing of these. For this purpose, apply the milling
cutter horizontally to the nail surface and remove the
unwanted layer of nail using slow circular movements.
15