Safety Warnings - Trix PA-1 Manual De Instrucciones

Function
This locomotive has the following equipment
and features :
This model is designed for operation with H0 2-rail
G
DC systems (track according to NEM standards)
with conventional DC power packs (12 volts).
G Built-in digital connector.
G The headlight and the number board lights both
work. They vary in brightness, depending on the
voltage present in the track. These lights can be
controlled as an auxiliary function after the loco-
motive is converted with a 66833 digital decoder.
The maintenance work necessary after normal
operation of this locomotive is described below.
Please see your authorized Trix dealer for repairs
or spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by TRIX have been installed in TRIX pro-
ducts or where TRIX products have been converted
in such a way that the non-TRIX parts or the con-
version were causal to the defects and / or damage
arising. The burden of presenting evidence and the
burden of proof thereof, that the installation of non-
TRIX parts or the conversion in or of TRIX products
was not causal to the defects and / or damage arising,
is borne by the person and/or company responsible
for the installation and / or conversion, or by the
customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it.
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.
5