Safety Warnings - Trix BR 52 Manual Del Usuario

Function
G Possible operating systems: NEM direct current
(± 12 volts DC), DCC System (NMRA standard).
Selectrix operation: Central Control 2000 must be
G
set for DCC operation for this train.
G Diode plugs included with the model are for use in
permanent DC operation.
G Different controllable light and sound functions
when the model is operated with DCC.
G Headlights change over with the direction of travel
and vary in brightness according to the voltage
present in the track, when the unit is operated
with direct current.
G Only available with DCC operation: Different para-
meters can be set (address, maximum speed,
acceleration delay, braking delay, volume).
Address set at the factory: 03.
G Locomotive can be retrofitted with a smoke
generator.
The necessary maintenance that will comes due with
normal operation is described below. Please see
your authorized Trix dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Trix have been
installed in Trix products or where Trix products have been converted
in such a way that the non-Trix parts or the conversion were causal to
the defects and / or damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation of non-Trix parts
or the conversion in or of Trix products was not causal to the defects
and / or damage arising, is borne by the person and/or company res-
ponsible for the installation and / or conversion, or by the customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it.
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.
5