Health O Meter Professional 2600KL Instrucciones De Uso página 11

SET-UP INSTRUCTIONS (CONT)
The scale must be powered on before performing any of the following operations.
Press to turn on the scale.
Unit of Measure Configuration / Unit Lock
This feature is not available on KG models)
The weight measuring unit (pounds/LB or kilograms/KG) can be changed by pressing
Follow this procedure to lock the weight measuring unit into LB or KG only.
Help
1. Press
2. While in the Help menu, press
Press
"Units Lock" is the first setting listed in the "Set Options" sub-
3.
menu. With "Units Lock" highlighted in red, press
change the "Units Lock" option. Choose "Unlocked", "LBS
Locked", or "KG Locked".
Note: You must press
Note: To permanently lock the weight measuring unit, see the
®
Everlock section on page 14.
Enabling Unit View with Unit of Measure Locked
(This feature is not available on KG models or models with a date code lower than 1918)
If the scale is locked per the instructions above, users can still view the alternate weight
measuring unit by enabling the "Unit View" option. Enabling the "Unit View" option allows the
user to press the Unit button to briefly display the weight in the alternate weight measuring unit.
After releasing the Unit button the display will return to the locked weight measuring unit. The
"Unit View" default setting is "Disable". Follow this procedure to enable "Unit View" when the
weight measuring unit is locked.
Note: If Everlock
"Everlocked".
Help
1. Press
2. While in the Help menu, press
Press
3. While in the "Set Options" sub-menu, press
through the options until "Unit View" is highlighted in red.
Press
4.
"Enable" to allow the user to view the weight in the alternate
weight measuring unit. Choose "Disable" to completely
disable the Unit button when weight measuring unit is
locked.
Note: You must press
P/N UM2600KL_ 2600KG_2610KL_2610KG_E_REV20190827_web
to access the Help menu options.
to advance to the next menu.
Enter
to save your selection.
®
is engaged this feature is not available and the setting will show as
to access the Help menu options.
to advance to the next menu.
to change the "Unit View" option. Choose
Enter
to save your selection.
to select "Set Options".
to
to select "Set Options".
to scroll
11
Unit
.