Health O Meter Professional 2600KL Instrucciones De Uso página 21

OPERATING INSTRUCTIONS (CONT)
Taking Down and Transporting a 2600KL/2610KL
(Note: Display head may vary in appearance)
1a. If connected, unplug the AC adapter.
1b. Fold the ramps onto the platform.
1c. Hold onto the handrail to keep it from
falling, then loosen all four handrail
locking pins located on the side of the
scale base. Loosen the knobs by
turning them counterclockwise until
the rod pops out completely as shown.
The pins are spring loaded and will
pop out when completely loosened.
Caution: Keep a firm hold on the
handrail while unlocking the pins.
2a. Carefully lower the handrail towards
the platform until it lies completely flat.
2b. Re-lock the pins by pushing the pin in
then turning clockwise until completely
tightened. Ensure all four pins are
completely tightened and locked.
Caution: All four pins must be
completely tightened and locked for
safe transport.
3a. Using the handles on the end of the
platform, carefully lift the scale
vertically onto its base where the
wheels are located.
3b. Slowly and carefully roll the scale to its
desired location.
hold on the scale during transport to
prevent the scale from falling.
P/N UM2600KL_ 2600KG_2610KL_2610KG_E_REV20190827_web
Caution: Keep a firm
locking pins
ramps
Caution: Keep a firm hold
on the handrail while
unlocking the pins.
Caution: All four pins must be
completely tightened and
locked for safe transport.
locked
Note: Depending on the ability of the caregiver, it
may require two people to lift or transport the scale.
21
unlocked
locked